News Detail

Welcome to our website!

Installation Precautions around door seal

2018-06-13 09:29:00

Seal installation precautions(around door seal

1: Before installation, the debris in the tank should be cleaned. When the glass is placed, ensure that the gap on both sides is even, and correct and fix the collision in time to avoid collision displacement and deviation from the center of the slot.
2: The door and window sealing strip should not be pulled too tightly, the length of the blanking is 2O-3Omm longer than the assembly length. The installation should be in place, with glass, glass notch close contact, the surface should be straight, so that the glass around the force evenly, and then the corner of the place with a special glue firmly bonded.
3: When sealing the glass with sealant, the rubber strip should be extruded out of the glass, leaving gaps for the injection of glue, and the depth of the injection should not be less than 5mm. Before the glue is cured, the glass should not be moved but should be kept stable.
The above is a brief introduction to the use of door and window sealing strips and installation precautions. I hope these introductions can bring you some help.

16
 
 
 
 
 
 
 
 
 
 
 

 

LEAVE A MESSAGE